Pre-made Patch Cables

Summary: Pre-made Patch Cables

ProAV Cables and Connectivity for Commercial Environments

Windy City Wire supplies low-voltage ProAV cable products and connectivity that support reliable signal distribution in corporate, education, healthcare, government, hospitality, entertainment, and industrial facilities. Our focus is straightforward: dependable products that make installation easier, keep projects on schedule, and perform consistently from the rack to each endpoint.

What You Can Expect

• Commercial performance – Signal integrity for video, audio, control, and network transport across conference rooms, classrooms, digital signage, command centers, and production spaces.
• Installation efficiency – SmartWire cables are manufactured in the U.S. and supplied ready for professional use. SmartWire Glide lubrication is applied to the jacket during manufacturing to reduce friction during pulling by up to 70%, helping speed your rough-in work and minimize re-pulls.
• Consistency and compatibility – Options for pro av cable, category cabling, and common interconnects ensure smooth transitions between bulk runs and device-to-device connections with the right patch cable or adapter where needed.
• Standardization – SmartWire offers extensive jacket and stripe color options to help integrators standardize cable identification across sites and service regions. Ask our team about custom colors for your organization.
• Low-voltage by design – Every cable we manufacture and supply in this category is low-voltage and built for commercial deployment.

Connectivity and Patch Options

• Category Patch Cords – Choose a cat6 patch cable for standard gigabit/2.5G links or a cat6a patch cable for 10G endpoints and aggregation. Common lengths include 3 ft, 5 ft, 7 ft, 10 ft, and 15 ft on select items.
• HDMI Interconnects – HDMI male-to-male device cables for displays, switchers, and extenders, with options reaching up to 50 ft on select assemblies.
• DisplayPort to HDMI – Adaptor patch leads for devices that require DisplayPort source to HDMI display connectivity; commonly available in 3 ft, 6 ft, 10 ft, and 15 ft.
• Serial/Control Cables – Options include 8‑pin Mini‑DIN M/M control leads in 10 ft for device control circuits.
• Fiber Where Required – For long-distance or high-bandwidth links that exceed copper limits, we can complement your build with pre made fiber cables in commonly requested terminations to bridge rooms, floors, or buildings.

Why ProAV Teams Choose Windy City Wire

• Project-ready selection – From backbone runs to short device jumpers, our offering supports full rooms, full floors, and full campuses.
• Labor savings – Smooth pulls and predictable handling characteristics help crews finish faster with fewer call-backs.
• Quality and testing – Tight manufacturing controls help deliver consistent performance across reels and assemblies, supporting repeatable results during commissioning.
• Single-source convenience – Consolidate bulk cable, patching, and device interconnects for more predictable procurement and simpler on-site staging.

Available Constructions
The following summarizes common constructions used across bulk runs and assemblies. Specifications may vary by item; consult product details or contact our team for exact part-level data.

• 23 AWG 4P Solid UTP PVC Low Voltage: Bulk Category 6 SmartWire for permanent links in horizontal and backbone runs. Designed for reliable data transport supporting AV-over-IP and control networks. (Length: 1000 FT)
• 23 AWG 4P Solid UTP PVC Low Voltage: Bulk Category 6A SmartWire for higher bandwidth applications and 10G transport over copper in demanding ProAV networks. (Length: 1000 FT)
• 24 AWG 4P Stranded UTP PVC Low Voltage: Cat6 patch cable assemblies for rack-to-device and device-to-switch connections. Flexible stranded conductors support repeated moves, adds, and changes. (Common lengths: 3 ft, 5 ft, 7 ft, 10 ft, 15 ft on select items)
• 26 AWG 4P Stranded UTP PVC Low Voltage: Cat6A patch cable assemblies suited for 10G endpoints, uplinks, and higher bandwidth AV transport. Flexible construction for tight spaces and patching fields.
• 30 AWG 19C Stranded PVC Low Voltage: HDMI M/M device interconnects for displays, switchers, and matrix gear in ProAV racks and rooms. Select items available up to 50 ft for longer device-to-device links.
• 28 AWG 8C Stranded PVC Low Voltage: 8‑pin Mini‑DIN M/M serial control leads for displays and peripherals. Designed for reliable device control in integrated AV systems. (Length: 10 ft)
• 30 AWG Multi‑Conductor Stranded PVC Low Voltage: DisplayPort M to HDMI M patch leads for source-to-display transitions where mixed standards exist. Available in multiple lengths including 3 ft, 6 ft, 10 ft, and 15 ft.

How Our ProAV Offering Delivers Value

• Confidence from design to handoff – Consistent, low-voltage SmartWire bulk cable paired with the right assemblies helps mitigate risk during installation and commissioning.
• Simplified bill of materials – One source for pro av cable, copper patching, and select device interconnects keeps bids clean and fulfillment predictable.
• Field-friendly handling – SmartWire Glide lubrication reduces pull friction by up to 70%, supporting faster rough‑in and cleaner pathways.
• Brandable identification – Standard and custom jacket/stripe colors help service teams quickly identify circuits across large sites.

Ready to plan your next project?
Talk with Windy City Wire about your scope, bandwidth targets, environment, and device list. We will align the bulk SmartWire, cat6 patch cable and cat6a patch cable options, and any necessary HDMI/DisplayPort or pre made fiber cables to help you deliver dependable rooms and networks on time.

Solutions: Pre-made Patch Cables

Pre‑Made Patch Cables for ProAV Integration
Windy City Wire supports commercial and industrial integrators with purpose‑built, pre‑terminated assemblies that simplify installation, reduce errors, and keep projects on schedule. Our pre‑made patch cable options cover common ProAV signal paths—from networked AV and control to source‑to‑display connections—so your teams can standardize designs across sites and service them quickly.

Where Pre‑Made Patch Cables Fit in ProAV Systems

• AV over IP switching and distribution: Use RJ45 to RJ45 cat6 patch cable or cat6a patch cable for uplinks, switch‑to‑endpoint links, PoE cameras, encoders/decoders, and control processors. Cat6 supports 1G networks; Cat6A is preferred for 10G and high‑density video transport.
• Unified communications and conferencing: Patch codecs, DSPs, touch panels, USB extenders, room PCs, and networked microphones to the rack or switch fabric with copper assemblies built for consistent performance.
• Source‑to‑display video: HDMI male‑to‑male jumpers for direct device connections (player to display, extender to monitor, switcher to projector). DisplayPort‑to‑HDMI cables bridge GPUs and media players to HDMI‑only projectors and flat panels.
• Control and automation: Pre‑terminated serial and mini‑DIN options address projector control, matrix switchers, KVM equipment, and legacy devices commonly found in refresh projects.
• Digital signage and wayfinding: Rapidly patch media players, encoders, and network drops during multi‑site rollouts, minimizing on‑site termination and rework.
• KVM and operations centers: Reliable jumpers between control processors, workstations, and visualization nodes where uptime and clean cable management are required.
• Backbone tie‑ins: For floor‑to‑floor or building‑to‑building runs, pair copper patching in the rack with pre made fiber cables for the long‑distance backbone to maintain throughput and signal integrity.

Industries That Rely on These Assemblies

• Corporate and enterprise: Conference rooms, huddle spaces, training centers, and network closets supporting hybrid work.
• Education: Classrooms, lecture halls, esports arenas, and campus digital signage needing fast moves, adds, and changes.
• Healthcare: Simulation labs, conference and training rooms, and non‑clinical AV environments where dependable patching supports uptime and compliance practices.
• Government and public sector: Briefing rooms, command/control, and council chambers with mixed legacy and modern endpoints.
• Hospitality and entertainment: Meeting spaces, ballrooms, theaters, and venue back‑of‑house racks where quick serviceability is key.
• Retail and QSR: Menu boards, media players, and store‑level control systems with standardized, repeatable installation processes.
• Transportation and campus environments: NOCs, wayfinding, and status displays requiring dependable patching under continuous operation.
• Houses of worship and nonprofit: Video, audio, and streaming systems with seasonal reconfiguration and volunteer‑friendly maintenance.
• Industrial and manufacturing: Monitoring stations, production floor signage, and ruggedized control segments that benefit from pre‑terminated reliability.

Why Integrators Choose Pre‑Made Cables in ProAV

• Speed and repeatability: Factory‑terminated connectors reduce onsite terminations, speed closeouts, and simplify change orders.
• Consistent performance: Predictable electrical characteristics and form factors minimize intermittent issues that can consume service time.
• Cleaner rack builds: Standardize on short, known lengths to improve airflow and cable management inside enclosures and credenzas.
• Serviceability: Swapping a patch cable is faster than re‑terminating in the field, reducing downtime for critical rooms.

Typical Cable Types in This Category

• RJ45 to RJ45 copper network patching: cat6 patch cable for 1G networks and PoE endpoints; cat6a patch cable for 10G trunking, higher bandwidth AV streams, and future‑ready designs.
• HDMI male‑to‑male: For source, extender, and display connections within equipment racks, lecterns, or wall plates. Select models are available in multiple lengths, including common room‑scale options and extended runs such as 50 feet for direct device connections when distance allows.
• DisplayPort to HDMI: A practical interconnect for media servers and graphics workstations outputting to HDMI displays or projectors.
• Serial/mini‑DIN control leads: Supports legacy device control and integration scenarios still prevalent in refresh and mixed‑technology environments.

Recommended Deployment Practices

1. Standardize lengths by use case: Keep common rack and room jumpers on hand in multiple lengths (for example, 3, 5, 7, 10, and 15 feet) to match common device spacing and reduce slack.
2. Select by bandwidth and distance: Use Cat6 for typical PoE and 1G AV over IP; step up to Cat6A for 4K/60 multi‑stream, 10G switching, or growth headroom. Use HDMI or DP‑to‑HDMI where short, direct video hops are appropriate.
3. Separate signal types for clarity: Keep network, video, and control patching organized to simplify troubleshooting and maintain uptime across mission‑critical rooms.
4. Combine copper and fiber wisely: Use pre made fiber cables for backbone spans and copper pro av cable patching at the endpoints for a balanced, cost‑effective architecture.

How This Helps Your Project
Choosing pre‑made assemblies streamlines labor, improves consistency across multi‑site rollouts, and provides a predictable bill of materials for bids and maintenance. Whether you are outfitting collaboration spaces, digital signage networks, or command centers, these patch cable options help you deliver reliable connectivity without unnecessary on‑site terminations.

Frequently Asked Questions: Pre-made Patch Cables

• How is your SmartWire ProAV cable sold on spools or in boxes?

  Our SmartWire ProAV cables are packaged in our patented RackPack carton for streamlined pulls and jobsite efficiency. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you