Temperature Control - Alerton Cables

Summary: Temperature Control - Alerton Cables

Temperature Control – Alerton Cables

Windy City Wire manufactures SmartWire low-voltage temperature control wire and cable engineered for reliable performance in building automation and HVAC environments. Our Alerton-focused constructions support controller networks, thermostats, VAV boxes, sensors, and actuators with plenum-rated designs that maintain signal integrity and simplify installation in commercial spaces.

If your project calls for alerton wire and cable that can handle demanding BAS applications, our shielded and non-shielded SmartWire options deliver the electrical characteristics, materials, and consistency facilities teams depend on. Many selections are well suited for BACnet MS/TP and other RS-485/RS-232 control links, helping streamline Bacnet deployments and device integrations across a building or campus.

Why choose SmartWire for Alerton temperature control?

• Plenum-rated safety and code compliance: CMP-listed options support installation in environmental air spaces across a wide range of commercial projects.
• Signal performance built in: O/A foil shielding choices help reduce EMI/RFI on long or noise-prone runs; Low-Capacitance options further support stable communications over distance.
• SmartWire Glide lubrication: Factory-applied jacket lubrication reduces pull friction by up to 70% to save time and help protect cable during routing.
• Right-size your runs: Available in 1000 FT and 2500 FT put-ups to match project scale and help reduce waste.
• Low-voltage by design: All SmartWire constructions in this category are low-voltage and purpose-built for control and signal applications.
• Material options that fit the task: Select bare copper or tinned copper conductors; shielded or non-shielded builds; and conductor color codes that promote clean, consistent terminations.
• Compliance and quality: UL Listed C(UL)US CMP and RoHS compliant selections; manufactured in the United States for consistent availability and quality control.

Typical applications

• Alerton controller I/O, room sensors, thermostats, damper/valve actuators, and relay control circuits
• BACnet MS/TP trunks and other RS-485 communication links (where specified)
• General HVAC temperature control wire and cable runs in plenum spaces

Options at a glance

• Available AWGs: 18, 22, 24
• Available Lengths: 1000 FT and 2500 FT
• Available Shielding: Shielded and Non-Shielded
• Conductor Color Codes: Black/White/Red and Black/White

Available constructions

• 18 AWG 3 Conductor Bare Copper Plenum (CMP) Low-Voltage: Shielded (O/A foil) build for HVAC control loops and device runs in electrically noisy areas; Black/White/Red conductor color code.
• 18 AWG 3 Conductor Bare Copper Plenum (CMP) Low-Voltage: Non-Shielded option for shorter or low-noise pathways serving temperature control circuits; Black/White/Red conductor color code.
• 22 AWG 2 Conductor Tinned Copper Plenum (CMP) Low-Voltage: Shielded Low-Capacitance design that supports longer RS-485/RS-232 control runs with reduced signal loss; Black/White conductor color code.
• 22 AWG 2 Conductor Bare Copper Plenum (CMP) Low-Voltage: Shielded (O/A foil) cable commonly used for BACnet MS/TP and general control wiring where enhanced noise rejection is desired; Black/White conductor color code.
• 24 AWG 1 Pair Tinned Copper Plenum (CMP) Low-Voltage: Shielded Low-Capacitance twisted pair for space-efficient routing and data-focused control links.
• 22 AWG 1 Pair Tinned Copper Plenum (CMP) Low-Voltage: Shielded twisted pair suited for communication-grade BAS connections and sensor networks.

How Windy City Wire adds value to your next project

• Purpose-built BAS control cable: Constructions aligned to the needs of Alerton systems help reduce troubleshooting and improve uptime.
• Faster, cleaner installs: SmartWire Glide lubrication supports easier pulls through conduit and crowded pathways, helping reduce rework and labor.
• Consistent, U.S.-made quality: Stable manufacturing and rigorous quality standards help ensure dependable performance from box to box.
• Configurable choices: Multiple AWGs, shielding options, and conductor color codes support clear identification and standardized terminations across all your sites.

Whether you are building out a new BAS network or upgrading existing control infrastructure, Windy City Wire SmartWire products provide a dependable, code-friendly foundation for temperature control wire and cable in Alerton applications. Talk to our team about selecting the right constructions for your scope, and keep your project moving with products and solutions built for real jobsite demands.

Solutions: Temperature Control - Alerton Cables

Temperature Control – Alerton Cables

Windy City Wire supplies purpose-built temperature control wire and cable designed for Alerton building automation systems and the broader HVAC ecosystem. Whether you are wiring a new Alerton front end, expanding a floor of VAV boxes, or upgrading a mixed-vendor portfolio that includes Trane, Honeywell, Johnson Controls, Siemens, or Schneider Electric, our low-voltage constructions support reliable control, clear communications, and code-compliant installation in today’s commercial environments.

Where These Cables Are Used

• Controller-to-device control loops for VAV/FPB boxes, fan coils, rooftop units (RTUs), heat pumps, dampers, and valve actuators
• Network communications for Alerton controllers and third-party devices running Bacnet MS/TP
• Low-level signaling for temperature, humidity, pressure, and occupancy sensors
• Equipment integration with boilers, chillers, cooling towers, and energy management systems
• Lighting and IAQ tie-ins where the BAS exchanges status with lighting controls, CO2 monitoring, and demand-control ventilation

Built for Alerton and Other BAS Platforms

• Alerton wire and cable: Options tailored for controller trunks, I/O wiring, and field device connections help maintain signal integrity across floors and risers.
• Multi-vendor compatibility: Suitable for Trane, Honeywell, Johnson Controls, Siemens, and additional systems that rely on Bacnet and similar low-voltage control architectures.

Recommended Constructions by Application

• Controller and device power/control (actuators, relays, end devices): 18 AWG, 3 conductor plenum options are commonly used to carry low-voltage control power and signals. Choose shielded versions when runs share pathways with noisy loads or VFDs; non-shielded versions suit quiet pathways and short distances.
• Bacnet MS/TP trunks (RS-485): 22 AWG or 24 AWG shielded, low-capacitance pairs support cleaner signaling and longer distances on shared BACnet segments; shielding helps reduce EMI in dense mechanical spaces.
• Sensors and low-current signaling: 22 AWG or 24 AWG shielded pairs for temperature, humidity, and pressure sensors—especially valuable in plenum spaces or near electrical equipment.

Key Advantages for Temperature Control Projects

• Plenum-rated (CMP) constructions: Meet code requirements for air-handling spaces across commercial buildings.
• Shielding options: O/A foil shielding helps reduce interference from VFDs, motors, and lighting ballasts, improving uptime and signal quality.
• Bare or tinned copper: Matches the environment and termination style; tinned copper is a good choice for higher humidity or where corrosion resistance is desired.
• Multiple gauges and formats: 18, 22, and 24 AWG options, with both multi-conductor and 1-pair constructions, allow right-sizing by distance, load, and device spec.
• Color-coded conductors: Support organized terminations and quicker service work at controllers and panels.
• Compliance and quality: UL Listed plenum-rated options and RoHS-compliant constructions deliver consistent performance across the project lifecycle.
• Installation efficiency: SmartWire can help teams quickly identify circuits and zones in the field, streamlining terminations and reducing callbacks.
• Project-friendly lengths: Available in 1000 FT and 2500 FT lengths to help reduce waste and align with project pull plans.

Systems, Protocols, and Integration

• Alerton controls: Trunk and I/O wiring for field controllers, unitary controllers, and supervisory devices.
• Honeywell, Trane, Johnson Controls, and others: Suitable for mixed-platform portfolios common in renovations and campus environments.
• Bacnet networks: Low-capacitance, shielded pairs support reliable MS/TP communications and reduce nuisance faults and retries.

Industries and Facilities

• Commercial offices, high-rise buildings, and mixed-use developments
• Healthcare facilities and laboratories
• Higher education and K–12 campuses
• Hospitality and retail
• Industrial plants, warehouses, and distribution centers
• Government buildings, transportation hubs, and airports
• Data centers and mission-critical environments

How to Choose the Right Cable

1. Identify the circuit type: Power/control to field devices, network communications (Bacnet MS/TP), or sensor runs.
2. Match the gauge: Use 18 AWG for higher current control or longer device runs; 22 or 24 AWG for data and sensor circuits per the device manufacturer’s recommendations.
3. Determine shielding needs: Select shielded cables near VFDs, motors, or fluorescent/LED drivers; non-shielded may be suitable in low-noise conditions.
4. Confirm code requirements: Choose CMP plenum-rated constructions for air handling spaces and adhere to local codes and specifications.
5. Plan your pulls: Choose 1000 FT or 2500 FT lengths to match the layout and reduce waste.

Why Windy City Wire for Temperature Control Wire and Cable

• Consistent performance for Alerton and multi-vendor BAS deployments
• Options for shielded vs. non-shielded, bare vs. tinned copper, and multiple AWGs
• Support for Bacnet networks and sensor-to-controller reliability
• Field-friendly features that help installers deliver clean, serviceable work

If you are planning an Alerton upgrade or a mixed-platform BAS project, our temperature control wire and cable portfolio offers the combinations needed for dependable controls wiring from the controller to every terminal unit and sensor. Contact us for help selecting the best construction for your specification, environment, and pull length.

Frequently Asked Questions: Temperature Control - Alerton Cables

• What AWG conductors are available with these SmartWire Temperature Control Alerton cables? 18 AWG, 22 AWG, and 24 AWG options are available.
• What other colors are these SmartWire Temperature Control Alerton Ccbles available in? Offered with Black/White/Red and Black/White conductor color codes.
• Are these SmartWire Temperature Control Alerton Cables made with solid or stranded copper conductors? These cables use stranded bare or tinned copper conductors for flexible installation.
• What lengths are these SmartWire Temperature Control Alerton cables sold in? Windy City Wire manufactures and stocks SmartWire Temperature Control wire in a 1,000 ft standard length, with select constructions also available in 2,500 ft.
• How is your SmartWire low-voltage Temperature Control cables sold on spools or in boxes? They are sold in boxes—specifically our patented RackPack carton. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you