CCTV CAT 5e Non-Plenum Cables

Summary: CCTV CAT 5e Non-Plenum Cables

CCTV CAT 5e Non‑Plenum Cables

Windy City Wire manufactures SmartWire low‑voltage CCTV Cable solutions for commercial and industrial environments that demand consistent performance and efficient installation. Our CAT 5e non‑plenum offerings are built with 24 AWG solid bare copper conductors and four precisely twisted pairs to support reliable IP video, access control, and building systems networking. Whether you are wiring a small system or a multi‑building campus, our U.S.‑made SmartWire helps your team deliver clean installs with dependable results.

Built for real‑world CCTV and network workloads
Category 5e performance up to 350 MHz helps maintain signal integrity for IP cameras, NVR connectivity, and PoE/PoE+ device power in typical surveillance deployments. Choose unshielded (UTP) for standard runs, or shielded (STP) for electrically noisy environments, long parallel runs with power, or areas with sensitive electronics. These cat5e wire constructions are designed for non‑plenum spaces and general in‑building routing where plenum ratings are not required.

SmartWire advantages that save labor
SmartWire is our U.S.‑manufactured low‑voltage cable line. Every cable comes standard with SmartWire Glide lubrication, a jacket treatment that reduces pulling friction by up to 70% to help crews move faster with fewer re-pulls and less wear on pathways. Standard gray jackets are available, and you can request custom jacket and stripe colors to support site standards and faster identification during installation and future service.

Where these CAT 5e cables fit
From cameras and encoders to networked intercoms and card readers, these Cat 5e options give integrators a dependable backbone for IP‑based security systems. They are well suited for PoE/PoE+ device power where Category 5e is specified, and for UTP‑to‑coax balun solutions when upgrading legacy analog CCTV to structured cabling.

• Performance: Category 5e, 350 MHz
• Conductor: 24 AWG, 4 twisted pairs, solid bare copper
• Shielding options: Non‑Shielded (UTP) and Shielded (STP)
• Jacket rating: Non‑Plenum (for general purpose and riser spaces where allowed by code)
• Lengths: 1000 FT and 500 FT options
• Colors: Standard gray jacket; custom jacket and stripe colors available upon request
• Applications: IP cameras, NVR/switch uplinks, access control, intercom, building automation
• Power support: Suitable for PoE/PoE+ deployments within Category 5e guidelines
• Low‑voltage: Designed and manufactured specifically for low‑voltage systems

Available Constructions

• 24 AWG 4 Pair Solid Bare Copper PE Insulation, Non‑Plenum PVC Jacket Low‑Voltage: Non‑Shielded (UTP) Cat 5e for general CCTV and network runs where ambient electrical noise is minimal. Supports 350 MHz Category 5e performance for IP video and PoE/PoE+ devices.
• 24 AWG 4 Pair Solid Bare Copper PE Insulation, Non‑Plenum PVC Jacket Low‑Voltage: Shielded (STP) Cat 5e with overall shielding to help mitigate EMI/RFI in challenging environments. Ideal near motors, generators, or dense cable trays where noise reduction is critical.

Why choose Windy City Wire for CCTV Cat 5e

• U.S. manufacturing and consistency: SmartWire is made in the United States for dependable quality across projects and phases.
• Installation efficiency: SmartWire Glide lubrication helps reduce pull force, shorten install time, and minimize pathway wear.
• Right‑fit options: Select Non‑Shielded or Shielded constructions in 1000 FT and 500 FT lengths to match application and code requirements.
• Project standardization: Custom jacket and stripe colors help teams quickly identify circuits across large sites and simplify maintenance.
• Low‑voltage focus: Every offering is engineered for the demands of low‑voltage security and building technologies.

Summary
Windy City Wire delivers Cat 5e CCTV Cable products that help integrators build reliable, code‑appropriate systems with fewer headaches in the field. With U.S.‑made SmartWire, shielding choices, practical length options, and pull‑friendly jackets, our product line provides a straightforward path to stable IP video performance and consistent labor savings on your next project.

Solutions: CCTV CAT 5e Non-Plenum Cables

CCTV CAT 5e Non‑Plenum Cables for Commercial and Industrial Security

Windy City Wire provides Cat 5e CCTV Cable solutions built for professional surveillance deployments in non‑plenum spaces. These 24 AWG, 4‑pair bare copper constructions deliver consistent signal integrity for IP and analog camera infrastructures, helping contractors, security integrators, and facility teams standardize on a dependable, easy‑to‑install low‑voltage platform. Use these cables to power and connect cameras, peripherals, and supporting devices across a wide range of commercial and industrial environments where plenum ratings are not required.

Where Cat 5e CCTV Cable Fits in Modern Surveillance

• IP CCTV over Ethernet (PoE/PoE+): Power and data to fixed and PTZ IP cameras via standard 4‑pair Ethernet runs. Cat 5e performance (350 MHz) supports 10/100/1000 Mb links (distance and device requirements apply) and is suitable for most enterprise NVR/VMS networks.
• Analog and HD over UTP with baluns: Transport CVBS or HD formats (AHD/HD‑TVI/HD‑CVI) using video baluns, while dedicating additional pairs for power and data as needed.
• Hybrid and migration paths: Use a single cat5e wire plant to support mixed environments—DVRs with analog cameras today, NVRs and IP cameras tomorrow—without replacing pathways.
• PTZ control and data: Carry RS‑485/RS‑422 control signals for PTZ cameras alongside video or Ethernet on separate pairs, following manufacturer guidelines.
• Edge devices and peripherals: Connect encoders/decoders, intercom door stations, network audio endpoints, and IoT sensors commonly integrated into the surveillance ecosystem.

Applications and Integrations

• Access control: Door controllers, intelligent readers, and camera‑assisted entry points sharing pathways or enclosures with surveillance devices.
• Video management systems (VMS): Reliable links from cameras to switches/NVRs to keep streams stable for live monitoring, analytics, and retention.
• Intrusion and perimeter detection: Cameras paired with sensors, radar, or fence detection systems around industrial yards and logistics hubs.
• Intercom and paging: Networked intercoms and help points at entries, parking, and public spaces integrated with video verification.
• Building automation and monitoring: Support for environmental monitors and occupancy analytics that leverage the same structured cabling backbone.
• Wireless bridges and point‑to‑point links: Backhaul remote cameras over rooftop or campus links fed by Cat 5e Ethernet to radios.

Industries We Serve

• Manufacturing and industrial plants: Process areas, production floors, and equipment corridors where durable connectivity and proper shielding choices reduce interference.
• Warehousing and distribution: High‑bay cameras, dock doors, yard surveillance, and conveyor lines requiring long runs and stable PoE delivery.
• Commercial offices and corporate campuses: Lobby, elevator, and parking cameras on segregated network segments, with consistent cable performance for centralized NVRs.
• Retail and hospitality: Storefronts, POS, and back‑of‑house monitoring with reliable links to analytics‑enabled VMS platforms.
• Healthcare: Corridors, patient areas (where code permits non‑plenum), and pharmacy monitoring with strict uptime and EMI considerations.
• Education (K‑12 and higher ed): Hallways, classrooms, stadiums, and residence halls using standardized cable for large multi‑building deployments.
• Transportation, parking, and public venues: Garages, terminals, and arenas requiring long runs, outdoor enclosures, and integration with access and public safety systems.
• Utilities and critical infrastructure: Substations, water/wastewater, and energy facilities with high EMI where shielded variants help maintain video quality.

Why Choose Cat 5e Non‑Plenum for CCTV

• Category 5e performance: Rated to 350 MHz to support typical surveillance data rates, with 24 AWG solid bare copper conductors for dependable PoE power delivery and reduced voltage drop over standard distances.
• 4‑pair versatility: Dedicated twisted pairs support Ethernet, analog video with baluns, control, and audio—allowing flexible designs without additional cable types.
• Non‑plenum value: Ideal for general commercial spaces, equipment rooms, and non‑return‑air areas. Always confirm local code requirements for plenum spaces.
• Shielding options: Select unshielded for typical office and retail environments; choose shielded where motors, VFDs, medical equipment, or heavy machinery create EMI.
• Termination and compatibility: Works with standard 8P8C (RJ45) terminations, keystones, and patch panels used in surveillance and IT networks.

Lengths and Options

• Standard 1000 ft reels, with select availability in 500 ft for smaller projects or service work.
• Available in both Non‑Shielded and Shielded Non‑Plenum constructions to match the EMI profile of the site.

Design and Deployment Guidance

1. Plan cable paths and PoE budgets: Keep camera home‑runs within recommended distances and account for switch power, cable gauge, and total load per port or midspan.
2. Separate from noise sources: Maintain spacing from high‑voltage lines, VFDs, and heavy motors. Use shielded Cat 5e where interference cannot be avoided.
3. Adhere to bend radius and pull tension limits: Protect the 4‑pair geometry to preserve return loss and crosstalk performance, which directly impacts image quality and link speed.
4. Use quality terminations: Terminate to accepted pinouts (TIA‑568A/B) and test links. Poor terminations are a common cause of camera dropouts and PoE issues.
5. VLAN and QoS on the network: For IP CCTV, isolate camera traffic and reserve bandwidth to keep streams stable during peak periods.
6. Analog over UTP best practices: Choose matched baluns, dedicate pairs for power and control, and verify distance limits per camera format.
7. Document labeling and routing: Maintain clear records to speed service calls, expansions, and system audits across multi‑site portfolios.

Typical CCTV Topologies Supported

• Edge PoE cameras to access switches: Cameras home‑run to IDF closets, uplinked to core NVRs/VMS servers.
• Analog cameras to DVRs with baluns: Video, power, and PTZ control consolidated over 4‑pair, simplifying cable management.
• Campus and large facilities: Aggregated camera traffic from multiple buildings over distribution switches, with Cat 5e feeding edge devices locally.

What You Can Expect from Windy City Wire

• Consistent electrical performance: 24 AWG, 4‑pair bare copper conductors engineered for dependable CCTV runs and stable PoE delivery.
• Choice of shielding: Match the cable to the environment—unshielded for typical office and retail, shielded for challenging industrial or healthcare settings.
• Streamlined purchasing for B2B teams: Standardized Cat 5e specifications across projects help contractors, security integrators, and facility managers build repeatable, supportable designs.

Whether you are standardizing a new IP camera network, extending analog systems with baluns, or supporting hybrid deployments during a multi‑phase upgrade, Windy City Wire Cat 5e CCTV Cable offers the flexibility, performance, and reliability commercial and industrial projects demand.

Frequently Asked Questions: CCTV CAT 5e Non-Plenum Cables

• What AWG conductors are available with these SmartWire CCTV CAT 5e Non-Plenum cables?
  24 AWG bare copper, 4-pair.
• What other colors are these SmartWire CCTV CAT 5e Non-Plenum cables available in?
  White-Blue/Blue, White-Orange/Orange, Blue/White, Orange/White.
• Are these SmartWire CCTV CAT 5e Non-Plenum cables made with solid or stranded copper conductors?
  Solid bare copper conductors.
• What length are these SmartWire CCTV CAT 5e Non-Plenumcables sold in?
  We manufacture and stock SmartWire CCTV wire in a standard 1,000 ft length; select items are also available in 500 ft.
• How is your SmartWire low-voltage CCTV cables sold on spools or in boxes?
  Our SmartWire CCTV wire is packaged in our patented RackPack carton. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you