Temperature Control Control Systems Honeywell Cables

Summary: Temperature Control Control Systems Honeywell Cables

Temperature Control — Control Systems — Honeywell Cables

Windy City Wire manufactures U.S.-made SmartWire® low-voltage cable engineered for dependable performance in Honeywell temperature control systems and other building automation platforms. Whether you are running BACnet MS/TP, Lon/Echelon networks, or general Temp Control sensor and controller connections, our temperature control wire and cable selection is designed to support stable communication, clean terminations, and long service life in commercial and institutional environments.

Every SmartWire cable in this category is built for professional installers who need consistency on the job: plenum-rated constructions for air-handling spaces, shielded and non-shielded options for noise management, and conductor configurations commonly specified for RS-485 and other control circuits. SmartWire Glide Technology® lubrication is applied during manufacturing to reduce pulling friction by up to 70%, helping crews route cable faster through congested pathways without messy external lubricants.

Built for control networks
- Supports BACnet, Lon, and Echelon-based control architectures, including RS-485 segments common in Honeywell building systems.
- Low-capacitance shielded options help maintain signal integrity over longer runs and in electrically noisy environments.
- Plenum-rated (CMP) selections meet code requirements for air-handling spaces while delivering reliable, low-voltage Temp Control communications.

Options at a glance
- Available gauges: 24, 22, and 18 AWG
- Constructions: Shielded and Non-Shielded plenum options, plus TFN insulated choices for select 18 AWG applications
- Conductor color codes: Black/White, Black/Red, and White-Blue/Blue for straightforward identification during terminations
- Available lengths: 1000 ft and 2500 ft
- RoHS compliant designs

Why SmartWire for Temperature Control?
- Consistency across an entire project: matching gauge and shielding options simplify submittals and standardize installations across zones and floors.
- Time-saving handling: SmartWire Glide lubrication reduces pull tension and helps minimize rework during rough-in and trim-out.
- Application-focused performance: low-capacitance shielded pairs/twisted constructions are well-suited for BACnet MS/TP and Lon/Echelon control loops, and non-shielded plenum options cover short, noise-free runs.
- U.S.-manufactured quality: dependable materials, precise geometry, and tight tolerances for repeatable results in Temp Control applications.

Available constructions

• 24 AWG 1 Pair Stranded Tinned Copper Plenum (CMP) 300V: Low-capacitance, shielded design for BACnet/Lon RS-485 runs where longer distances or higher EMI environments require added noise protection.
• 22 AWG 1 Pair Stranded Tinned Copper Plenum (CMP) 300V: A versatile, shielded plenum pair for common temperature control loops and controller-to-device RS-485 links in Honeywell systems.
• 18 AWG 1 Pair Stranded Tinned Copper Plenum (CMP) 300V: Heavier-gauge, shielded plenum pair for lower resistance over long paths or where additional mechanical robustness is desired.
• 22 AWG 1 Pair Solid/Bare Copper Plenum (CMP) 300V: Non-shielded option for shorter, low-noise control circuits and sensor drops that do not require shielding.
• 22 AWG 2 Conductors Stranded Tinned Copper Plenum (CMP) 300V: Shielded, low-capacitance construction for dual-conductor RS-485-based Temp Control networks and multi-point control wiring.
• 22 AWG 2 Conductors Solid/Bare Copper Plenum (CMP) 300V: Shielded plenum option for two-conductor Honeywell control wiring where a bare-copper core is specified.
• 18 AWG 1 Pair Solid TFN 600V: Twisted, unshielded pair for specific control and power-limited control circuits requiring TFN insulation and a 600V rating.

Where these cables fit
- Honeywell temperature control networks using BACnet MS/TP or Lon/Echelon protocols
- Controller, sensor, and actuator wiring in commercial HVAC systems
- Plenum spaces and risers where CMP ratings and reliable signal performance are essential

How Windy City Wire adds value
Choosing SmartWire for your next Temp Control project gives your team a dependable, code-compliant product line that is easy to standardize across sites. With application-ready shielding choices, multiple gauges, clear conductor color codes, and SmartWire Glide lubrication for smooth installation, you can plan, pull, and terminate with confidence. Our temperature control wire and cable portfolio helps reduce installation time, support stable Bacnet and Lon communication, and keep your Honeywell systems running reliably from startup through maintenance.

Need help selecting a cable?
Our team can guide you to the right gauge, shielding, and plenum construction for your specific Bacnet or Lon/Echelon control network and site conditions.

Solutions: Temperature Control Control Systems Honeywell Cables

Honeywell Temperature Control Cables for Reliable Building Automation

Windy City Wire supplies purpose-built temperature control wire and cable engineered for Honeywell building automation and HVAC controls, as well as other leading Temp Control platforms. From network trunks to device-level terminations, our constructions support signal integrity, code compliance, and consistent performance in demanding commercial environments.

Designed for today’s control networks

• Supports common BAS protocols, including Bacnet MS/TP and LonWorks (Lon) by Echelon, along with vendor-specific control buses.
• Plenum-rated CMP options help meet code in air-handling spaces while maintaining low capacitance for clean data transmission.
• Shielded and non-shielded twisted-pair selections help match noise environments and manufacturer recommendations.

Where these cables fit in a Honeywell ecosystem—and beyond

• Honeywell controllers, field devices, and supervisory networks (WEBs, ComfortPoint, Spyder, and sensors/actuators).
• Trane Tracer, Alerton BACtalk/Compass, Johnson Controls Metasys, Siemens Desigo/Apogee, Schneider Electric EcoStruxure, Delta Controls, Automated Logic, Carrier, and other open-protocol BAS platforms.
• Bacnet MS/TP trunks, Lon/Echelon free topology or bus wiring, RS‑485 device networks, and low‑voltage thermostat and actuator runs.

Typical applications in HVAC and BAS

• Network communications between supervisory controllers, VAV controllers, and field I/O.
• Thermostats, zone sensors, duct/space temperature and humidity sensors, and CO2/IAQ devices.
• Valve and damper actuators, relays, end switches, and control transformers.
• Air handling units (AHUs), rooftop units (RTUs), VAV boxes, fan coils, chiller/boiler plant controls, and energy management interfaces.

Industries and facilities served

• Commercial offices and mixed‑use buildings
• Healthcare, life sciences, and laboratories
• Higher education, K‑12, and campus facilities
• Data centers and critical environments
• Hospitality and retail
• Industrial manufacturing, warehouses, and cold storage
• Government, municipal, and public infrastructure

Why choose Windy City Wire for Honeywell Temp Control projects

• Plenum CMP constructions: Meet code requirements for air plenums without sacrificing flexibility or performance in ceiling and mechanical spaces.
• Low capacitance designs: Help maintain signal clarity and stable communications on Bacnet and Lon networks over longer runs.
• Shielding where it matters: Options with overall foil shields provide added noise immunity near VFDs, generators, or dense electrical gear.
• Reliable conductors: Tinned and bare copper options support corrosion resistance and dependable terminations in a variety of environments.
• Right-sized gauges: 24, 22, and 18 AWG selections allow you to balance distance, power, and device requirements across network and control circuits.
• Flexible configurations: 1‑pair and 2‑conductor options cover sensors, actuators, and bus wiring with shielded and non‑shielded choices to match specifications.

Available options at a glance

• AWG sizes: 24, 22, 18 (choose by run length, current, and manufacturer guidance)
• Constructions: 1 pair and 2 conductor
• Shielding: Shielded and Non‑Shielded models for different EMI conditions
• Insulation type: TFN available for select 600‑volt applications
• Lengths: 1000 FT standard, with select constructions also offered in 2500 FT for large projects
• Conductor color codes: Black/White, Black/Red, and White‑Blue/Blue for quicker identification

Selecting the right cable for Honeywell and multi‑vendor projects

1. Network backbone and trunks (Bacnet MS/TP, Lon/Echelon): Choose twisted‑pair low‑capacitance constructions; use shielded versions in electrically noisy spaces or when the specification calls for it.
2. Device drops and sensors: 22 or 24 AWG 1‑pair cables are commonly used for temperature, humidity, or CO2 sensors; select shielding when routed near VFDs, lighting, or high‑current feeders.
3. Actuators and relay control: 18 or 22 AWG 2‑conductor options are well suited for valve/damper actuators and low‑voltage relay circuits.
4. Line‑voltage thermostat or control transformer circuits: Where specified, TFN 600‑volt options deliver robust insulation for appropriate high‑reliability runs.

Installation considerations that protect performance

• Follow Honeywell and system‑specific wiring guides for topology (bus vs. free topology), termination, and grounding requirements.
• Maintain polarity and daisy‑chain practices on RS‑485 Bacnet MS/TP networks; avoid stubs and minimize splices to reduce reflections.
• Route control cabling away from high‑voltage feeders and VFD output conductors; specify shielded cable where required.
• Confirm plenum (CMP) use in air‑handling spaces per local code and AHJ requirements.
• Size conductor gauge to distance and device load to help ensure reliable communications and control response.

Confidence across brands and protocols

Whether you are building out a Honeywell WEBs system, expanding an Alerton or Trane network, or integrating mixed platforms over Bacnet and Lon/Echelon, our temperature control wire and cable portfolio offers the flexibility and consistency needed to keep schedules on track and systems stable. With multiple gauges, shield configurations, and application‑specific constructions, you can standardize on a single source for Temp Control wiring across all project types.

Ready to specify

Choose the construction that aligns with your Honeywell or multi‑vendor BAS specification, then select the length that fits your rollout. Standard 1000 FT reels are available, and select items also come in 2500 FT for large‑scale deployments. For help matching wire to a particular controller, sensor, or network topology, contact our team for a recommendation based on your submittal.

Frequently Asked Questions: Temperature Control Control Systems Honeywell Cables

• What AWG conductors are available with this SmartWire Temperature Control Systems Honeywell Cables?
  Available gauges include 24 AWG, 22 AWG, and 18 AWG.
• What other colors is this SmartWire Temperature Control Systems Honeywell Cables available in?
  Offered conductor color codes include Black/White, Black/Red, and White-Blue/Blue.
• Are these SmartWire Temperature Control Systems Honeywell Cables made with solid or stranded copper conductors?
  Both solid and stranded copper constructions are available, depending on the specific part number. For example, an 18 AWG 1‑pair TFN option is solid copper, while other selections are offered with tinned or bare copper conductors.
• What length is this SmartWire Temperature Control Systems Honeywell Cables sold in?
  Our standard length is 1,000 ft. Select items are also available in 2,500 ft lengths. At Windy City Wire, we manufacture and stock SmartWire Temperature Control wire in 1,000 ft length as our standard length.
• How is your SmartWire low-voltage Temperature Control cables sold on spools or in boxes?
  Our SmartWire Temperature Control Wire is packaged in our patented RackPack carton for streamlined pulling and installation. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you